Home Business What Do You Need To Know About Extension Cord Safety? 

What Do You Need To Know About Extension Cord Safety? 


What Do You Need To Know About Extension Cord Safety? 

Extension cables are a frequent and easy way to connect a device to a power source. However, if not utilized with prudence, they can become fire dangers and endanger your physical security. 

Length of the cord 

Do not surpass a height of 100 feet. You will have to use a temporary power distribution unit if a project needs more than 100 feet of distance. Never connect two extension cords. Fires, equipment breakdown, and electrocution can all result from this error. When two cables are connected, their current capacity is reduced by half, resulting in power loss and overheating. Only buy those built with 12-gauge wire to prevent having to estimate and think about voltage loss issues. An extension board with switch has many outlets on one end, while the other has an insulated electric line with a plug. You can use this one to connect one or more gadgets to a power outlet if their cords aren’t long. 

Image source 

GFCI Protected Cords 

Only use GFCI-protected extension cords. The GFCI (Ground Fault Circuit Interrupter) is a device that disconnects electricity in a potentially dangerous scenario. If there is a leakage or mismatch of 4-6mA, a GFCI analyzes electricity flowing through the cable and disengages power. The GFCIs are inexpensive and can save your life. 

For more informative articles and reviews on Home and Interior, click here to check 99consumer.

Avoid Damaged Cables 

Never use a destroyed cable. The electrical or masking tape indicates that it has been damaged and fixed. 

Image source 

Patching cords are not permitted. Cutting off the damaged part and installing a new tip is the only appropriate repair for a damaged one. It may result in the cord is shorter, but this is fine. Surface harm to the cord that breaches the outer jacket is permanent and irreversible. Take care to keep your cords safe. Dropping equipment or substances on them, running over them, and squeezing or twisting them are easy ways to destroy them. 

Never Attach to Walls 

Never use metal screws or staples to secure extension wires to walls and ceilings. The covering on cords is rather delicate and flexible, making them subject to damage. When you use pins or staples to attach them, or even if they are near the cord, they are more vulnerable. The cable might be damaged by any hits, pinching, or twisting. Any pressure can cause the jacket to wear through. Buy cords authorized by a third-party testing facility. 

Image source 

What are the dangers of extension cords? 

  • If the extension cable is covered, heat cannot escape, and a fire may develop. 
  • Make extension cables visible and, if feasible, avoid running them through high-traffic areas. For those strolling through the region, they can be a tripping hazard. 


Also, keep in mind that extension cables are just temporary wiring options. Consider improving your room’s electrical system if you notice yourself using them regularly. 

Enforce extension cord safety requirements by ensuring that the electrical cords are utilized correctly indoors and outdoors, are not damaged, and are not overused. 

Exit mobile version