4.4 C
New York
Wednesday, November 30, 2022

Garage Lighting Styles: And Tips On How To Improve The Lighting

The greatest garage lighting will change a gloomy, potentially hazardous place into a safer, brighter atmosphere that is conducive to correctly completing the task at hand. Fortunately, there are numerous high-quality options available for such lighting.

Replace fluorescent lights with energy-efficient LEDs; install a screw-in, multiposition light bulb; otherwise, quickly and economically enhance your garage lighting. Outdoor parking garage lights can be purchased at an affordable rate for such endeavors.

Garage Lighting Fixtures Are Classified Into Five Categories.

Shop Lighting

Shop lights have a tube-like design and can be hung from the ceiling by a chain or rope or attached directly to the ceiling. They usually include a chord that plugs into a wall socket, so you don’t have to figure out how to hardwire the lights to your electrical system.

High-Intensity Area Lighting

As the name implies, this lighting style is intended for garages with high ceilings, often greater than 15 feet in height. They can be hung from the ceiling using a hook, pendant, or chain or mounted directly to the ceiling.

Led Recessed Lighting

Recessed lights are circular and fit into holes in the ceiling. These are hooked into your electrical system and are controlled by a wall switch. They focus light in a downward direction.

Lights That Wrap Around

Wraparound lights are semicircles in form. The flat side rests flush against the ceiling, while the round side hangs from the ceiling, directing light in various directions.

Flush-Mounted Lights

Flush-mount lights, like wraparound lights, are installed directly on the ceiling. They are round in form and typically more attractive, making them ideal for various common areas in your house, such as corridors, patios, or workplaces.

How To Improve The Lighting In Your Garage

Here are some ideas for getting a well-lit garage.

Consider Other Lighting Options.

Consider ambient, task, and accent lighting in addition to the lighting options outlined above. Ambient lighting casts a gentle overhead light over a big area, making it easier to find items and see what you’re working on. Task lighting emits a strong light focused on a specific region, providing illumination for detail-oriented tasks.

Accent lighting highlights a specific region and is less prevalent in garages. Accent lights, on the other hand, might highlight the tools hanging on a pegboard, allowing you to choose the items you require readily.

Determine How Much Lighting Your Garage Requires.

The size of the area determines the quantity of light your garage requires, the number of windows, and the sort of lighting you choose. Light output is measured in lumens, and ambient lighting generally requires 50 lumens per square foot, task lighting requires 300 lumens per square foot, and accent lighting requires 75 lumens per square foot.

After deciding how much light you require, select light bulbs with sufficient energy to provide that brightness. For instance, suppose you have a 360-square-foot two-door garage and want to put ambient lighting in one half and task lighting in the other.

Using the above mentioned standards, you would require 54,000 lumens on the task side and 9,000 lumens on the ambient side. Using a lumen-to-watt conversion table, you may determine the light you require, the number of lights required to illuminate the room, and the wattage of your bulbs.

For example, 38-watt LED bulbs provide 3,000 lumens apiece, so you could use three of them for ambient lighting or three 200-watt incandescent lights to create the same amount of light.

Select Bulbs With A High CRI

The Color Rendering Index (CRI) indicates how closely a light bulb’s light mimics light from a naturally occurring source, such as the sun. A bulb will be rated from 0 to 100, with higher numbers signifying a more natural-looking light. Choose a bulb with a CRI of 85 or higher for your garage light.

Consider The On/Off Switch On Your Lights.

Garage lights may be switched on and off with a cord switch, linked to your electrical system, and controlled by a wall switch. Corded lights are simpler to install but must be near a power outlet. Hardwired lights take more effort to install, but they are easier to operate.

If you don’t want to use either option, you can add motion-activated lights. This entails hardwiring the lights to your electrical system, but you won’t have to find a switch to turn the lights on or off, and the lights will be more energy-efficient because they will turn off automatically when you leave your garage.

Other Ways To Incorporate Light

Adding a skylight or window to your garage helps improve natural light. You could also repaint your garage in white or eggshell to brighten it up or install a mirror to open up the area. Consider replacing your present garage door with one that has windows to brighten the space.

Conclusion

After we finish our research, we create a well-rounded, user-friendly article that contains our suggested items and supplementary information to assist homeowners like you in making the right purchase.

Related Articles

Stay Connected

0FansLike
3,585FollowersFollow
0SubscribersSubscribe

Latest Articles