After setting up a Netgear extender, you’ll be able to use its WiFi network. However, you can’t access the network unless you know its proper name or SSID. Generally speaking, the pre-set name for a network is not ideal. Put simply, the WiFi name is duplicated by other users. You should thus modify the WiFi name of your Netgear WiFi range booster by accessing the mywifiext setup page.
Changing the WiFi name of your repeater might give you a distinct identity and make your network easier to find. Inquiring minds want to know how? This article will help you out, by the way. Have a good read-through of it.
How to Change Nighthawk Extender Network Name?
- Connect the WiFi Devices
Changing the name of your network’s WiFi requires a connection between your Netgear WiFi range extender and the router you want to use as a repeater. To get the best possible performance, go with a hardwired option. That is, connect the two devices together by means of an Ethernet wire. That’s not the only approach, however.
Wireless networks are another possible alternative for modern users. In this setting, the devices need closer proximity. This process ensures that the repeater can pick up router signals. As soon as the connection has been made, you may proceed.
- Turn On the Extender
We need to activate both the host router and the Netgear repeater. To that end, choose a wall socket that is both clean and functional. The selected panel must not have a history of short-circuiting. In addition, the repeaters’ pins must be snug in the board.
Without this, the device will receive an unsuitable supply. Changing the WiFi repeater’s name requires a stable power source.
- Open a Computer
The process of changing the name of a WiFi network begins with powering up a personal computer or portable computer. Verify that the most recent software version is installed on the computer. In other words, it facilitates the use of modern browser versions. In addition, having an up-to-date operating system reduces the likelihood of malfunctions.
- Access an Internet Browser
The following action is to open a web browser. It’s important to use a modern, reliable, and secure web browser. When you first start the process, it must function without crashing. If you’re still using an ancient browser, it’s time to upgrade. This signifies that you need to erase your web browser’s cached pages and cookies.
- Perform Netgear Extender Login
Acquire the Netgear Genie login information in order to access the Netgear extender. Start by going to the repeater’s login page. Therefore, in your browser address box, type in your device’s predetermined URL.
If you’re using a Netgear WiFi range extender AC750, for instance, you’ll need to be able to access its URL. In addition, the device’s default IP address may be used.
- Access Settings > Wireless
Once you’ve logged in, go to the repeater’s settings, and then switch to wireless operation. Altering the repeater’s WiFi name may be done at this point. It has to be updated for both 2.4 GHz and 5 GHz wireless networks.
- Select the Save Option
If you want to keep your changes, you must click the Save option. By doing so, your devices will be immediately cut off from the repeater network. Restarting your device may be required for the changes to take effect.
Can’t Change Nighthawk Extender Network Name?
If you’re having issues with your Netgear range extender and are unable to modify its WiFi name, go through these solutions:
- Ensure you are using the proper URL by clicking here.
- In addition, ensure you have the correct login username and password at all times.
- You might be looking at the incorrect section of the repeater control panel.
Following the steps outlined above, you should be able to modify the WiFi name of your Netgear WiFi range extender using the Netgear Genie login details without any difficulty.